P-10 DISPLAY as Counter.

Status
Not open for further replies.

koolguy

Active Member
Hello sir,
In factory/production manufacturing unit of sprinkler there is need of Display with counter of actual and target with error/efficiency calculation i have BX5M1 series card.
It should count the irrigation sprinkling, with sensor it should detect and count it.
but the issue is how to connect it with card i mean micro controller , the card work on Led show 2014 software
 
I'm not familiar with the BX5M1 P10 display.... Have you got a datasheet??
 
There are trojan viruses on that web site..... Have you not a virus killer running on your computer???

Start again..... Have you a datasheet for this thing!!!
 
Hello,

Here is the pic of Display from Google which display led are these i am not familar?
**broken link removed**
 
Ok... Lets start again...

You asked how to interface the LED display to a micro controller!!!! I haven't got a crystal ball.... Without the data sheet I cannot help you atall... I have no knowledge of the hardware or software.... Both of which are in the data sheet... Showing me random pictures doesn't help me at all!!
 
Do I take it you want to BUILD a display similar to the ones you keep showing us.... The language barrier is tripping us up a little....
 
I think you are going to need a separate controller to monitor the production sensor and do the calculations and send to the screen controller.
 
I think you are going to need a separate controller to monitor the production sensor and do the calculations and send to the screen controller.
Click to expand...
There is no need of Controller Screen
Actually, There will be keypad with target and actual will be counted by sensor using IR and difference on Seven segment number.
 
RITESH KAKKAR said:
There is no need of Controller Screen
Actually, There will be keypad with target and actual will be counted by sensor using IR and difference on Seven segment number.
Click to expand...
If all need need is the numbers on a 7 seg display, then are called Totalizer's.
Why are you talking about P-10 displays and drivers?
 
Status
Not open for further replies.

Similar threads

P
Is HM-10 RX pin receiving data to be transmitted?
Replies
14
Views
2K
Nigel Goodwin
A
  • Question
Solved PIC Frequency counter - Interesting quandary
2
Replies
23
Views
3K
Mike - K8LH
M
  • Question
Lcd display does not show any text.
2
Replies
31
Views
2K
mouse22
M
F
  • Question
Issue with Interfacing LCD with PIC16F877A
2
Replies
22
Views
3K
Farhaad
F
S
  • Question
Where we can find counter Period (AutoReload Register) in stm32?
Replies
0
Views
1K
Saeedk9574
S
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…