birdman0_o
Active Member
Does anybody know how to play around with Vref for the ADC module with Oshonsoft?
Welcome to our site!
Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
-
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Oshonsoft
- Thread starter birdman0_o
- Start date
- Status
bryan1
Well-Known Member
G'day Boo,
First have you the analogue external module off Eric's blog? If so it's easy to set the Vref as the module has a window for setting it. If you don't then just set the pin on the micro to analogue and set the voltage you want to the pin. In my opnion the best part about the Oshonsoft Basic is the simulation part where the external modules simulate the hardware. With my charge controller project trying to set the trip points for high and low voltage would be fun without the external modules.
Cheers Bryan
First have you the analogue external module off Eric's blog? If so it's easy to set the Vref as the module has a window for setting it. If you don't then just set the pin on the micro to analogue and set the voltage you want to the pin. In my opnion the best part about the Oshonsoft Basic is the simulation part where the external modules simulate the hardware. With my charge controller project trying to set the trip points for high and low voltage would be fun without the external modules.
Cheers Bryan
- Status
Latest threads
-
-
Which of the figure for DMA block diagram is correct? I am confused
- Started by shivajikobardan
- Replies: 1
-
Is there any truth to the claim that resonant frequency of the skull can be used to make people hear things?
- Started by signalblocking
- Replies: 4
-
-
