Hai
Here aim measuring the vacuum in the chamber and displaying on the LCD using 89c51.
For this display aim using look up table method .It is taking a lot of memory for storing table values due to non linearity.
My vacuum range is 1.0E+3 to 1.0E-3.
How to convert non linear signal to linear signal.
Regards
chandu
Here aim measuring the vacuum in the chamber and displaying on the LCD using 89c51.
For this display aim using look up table method .It is taking a lot of memory for storing table values due to non linearity.
My vacuum range is 1.0E+3 to 1.0E-3.
How to convert non linear signal to linear signal.
Regards
chandu