I am trying to use Nigel's LCD example found here (The first one)
However, I'm using a 16F628A and simulating it in ISIS.. It doesn't really look like it's working correctly, as the pins flash (as they should) but for about 10 seconds - one would imagine that it should be near instant with the short text string being sent??
Also, nothing is shown on the LCD screen.. It remains blank.
I have modified the program header and selected the "Target Device" in MPLAB as 16F628A. is there something else I'm missing?
However, I'm using a 16F628A and simulating it in ISIS.. It doesn't really look like it's working correctly, as the pins flash (as they should) but for about 10 seconds - one would imagine that it should be near instant with the short text string being sent??
Also, nothing is shown on the LCD screen.. It remains blank.
I have modified the program header and selected the "Target Device" in MPLAB as 16F628A. is there something else I'm missing?
Code:
LIST p=16F628A ;tell assembler what chip we are using
include "P16F628A.inc" ;include the defaults for the chip
ERRORLEVEL 0, -302 ;suppress bank selection messages
__config 0x3D18 ;sets the configuration settings (oscillator type etc.)