I program my PIC16f877a by using MPLAB IDE v 8.56. When program the PIC16f877a, it show that
Initializing PICkit 2 version 0.0.3.63
Found PICkit 2 - Operating System Version 2.32.0
PICkit 2 Unit ID = OlHoss
Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC16F877A is correctly installed in the application. (Expected ID = 0xE20, ID Read = 0x9A0)
PICkit 2 Ready
Reading Target
PKWarn0003: Unexpected device ID: Please verify that a PIC16F877A is correctly installed in the application. (Expected ID = 0xE20, ID Read = 0x9A0)
Reading Program Memory
Reading EEPROM Memory
Reading User ID Memory
Reading Configuration Memory
PICkit 2 Ready
[Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC16F877A is correctly installed in the application. (Expected ID = 0xE20, ID Read = 0x9A0)]
how to solve the target power not detected and the unexpected device ID. Hope you guys can help me...
Initializing PICkit 2 version 0.0.3.63
Found PICkit 2 - Operating System Version 2.32.0
PICkit 2 Unit ID = OlHoss
Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC16F877A is correctly installed in the application. (Expected ID = 0xE20, ID Read = 0x9A0)
PICkit 2 Ready
Reading Target
PKWarn0003: Unexpected device ID: Please verify that a PIC16F877A is correctly installed in the application. (Expected ID = 0xE20, ID Read = 0x9A0)
Reading Program Memory
Reading EEPROM Memory
Reading User ID Memory
Reading Configuration Memory
PICkit 2 Ready
[Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC16F877A is correctly installed in the application. (Expected ID = 0xE20, ID Read = 0x9A0)]
how to solve the target power not detected and the unexpected device ID. Hope you guys can help me...