Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
this is my first post. i want to encode the characters as well as digits in the "qwerty" keyboard to DTMF tones to send through telephone wire.please provide me with the idea for the encoding as well as decoding operation for such circuit.
with regards
thankyou
For sure you will use a lot of frequencies, and you also have to calculate their harmonics, DTMF's of phone, specifically the frequencies were not just picked up randomly but calculated so that their harmonics would not interfer and be recognized as any other signal.
Well using crystal 3.579545MHz will produce the standard tones which can be decoded easily. A simple solution is to use crystals of different values for producing different tone frequencies and using the same values on the decoder side.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
