Need help Finding a part

J

james.smithaf

New Member

• Sep 27, 2010

• #1

Hi,
I'm looking to repair a power board for a tv and in my repair process I burned up a 13.0 mH common mode filter. does anyone know where I can find these for purchase? Thanks!


Smitty

 

mbarazeen

Member

• Sep 27, 2010

• #2

you can esily rewind it, normally it comes in open ferrite core. use the same wire number and number of turns.

 

J

james.smithaf

New Member

• Sep 28, 2010

• #3

I thought about that but it has a coating on it. does that matter?

 

Nigel Goodwin

Super Moderator

Most Helpful Member

• Sep 28, 2010

• #4

If this is the mains filter, then just get one out of another scrap TV.

 

mbarazeen

Member

• Sep 28, 2010

• #5

james.smithaf said:

I thought about that but it has a coating on it. does that matter?

Click to expand...

the coating you mean may be the slag that is applied to prevent inter winding vibration, you can rewind it and apply some slag, even without it it must work.

if you have another scrap set, you can pull it from it as Nigel told.