You need to learn when parts are in series and when they are in parallel.
You also need to learn the simple formula to calculate the value of a coupling capacitor for a certain cutoff freqyency.
I mostly Been doing this electronics stuff on my own.
Yes! This is why im starting tech school this September...
These were the only parts i have on hand. Why buy them. When kit parts will be supplied in class,
to use in 2weeks.
The 1M trimmer pot can be use at 600K. The 1M is what i have.
My mistake.I Had a 4.7K and 10K. It was not 2.2k.I tested the resistor with my multimeter.Was
4.68K 5% gold band 1/4watt. Close enough.
So i will use this. As you suggested 4.7K.
What is the simple math for calculating these capacitors for the cutoff FQ.Please explain.If you May.
Also! I only have 1uF caps in my juck Box. So i wrote the wrong value it should of been 1uF not 0.1uF.Sorry!
For capacitor C2 should that be a 1uF cap also as C1... Is 0.33 to low.
Thank you very much for your help and your comments...