joshua.svn
New Member
dear sir,
Reading accelerometer specifications
Wilcoxon Research accelerometer specification
Dynamic specifications
Sensitivity
This specification shows the “nominal” sensitivity. This is the voltage output per engineering unit; for example, 100 Milli-Volts per g (100 mV/g) will yield an AC voltage output of 100 milli-Volts per g of acceleration. The AC voltage will alternate at frequencies corresponding to the vibrational frequencies. The amplitude of the AC signal will correspond to the amplitude of the vibration measured. All frequencies will be present simultaneously. This is what creates a vibrational signal spectrum.
Above explanation for ctc transducer .
please tell me what is equivalent milli volts out for the charge output piezoelectric transducer
(vibration ) mentioned as Charge Sensitivity pC/m/s2 .
it is written on the transducer. pC/m/s2 = how many ac milli volts.
svn.
Reading accelerometer specifications
Wilcoxon Research accelerometer specification
Dynamic specifications
Sensitivity
This specification shows the “nominal” sensitivity. This is the voltage output per engineering unit; for example, 100 Milli-Volts per g (100 mV/g) will yield an AC voltage output of 100 milli-Volts per g of acceleration. The AC voltage will alternate at frequencies corresponding to the vibrational frequencies. The amplitude of the AC signal will correspond to the amplitude of the vibration measured. All frequencies will be present simultaneously. This is what creates a vibrational signal spectrum.
Above explanation for ctc transducer .
please tell me what is equivalent milli volts out for the charge output piezoelectric transducer
(vibration ) mentioned as Charge Sensitivity pC/m/s2 .
it is written on the transducer. pC/m/s2 = how many ac milli volts.
svn.