Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
what is wrong with this circuit.
transient analysis = stop time 100ms , start time 0ms , maximum timestep 10
how did it worked ? i used the same transient settings.
i am getting this
what transient settings should i use then, my 1/RC time constant is 1/100s alternatively frequency is 100Hz
image attached
what transient settings should i use then, my 1/RC time constant is 1/100s alternatively frequency is 100Hz
image attached
i got this using same settings.
now what ?
ok now its coming .
but its therotical frequency is something else if you calculate 1/RC But it is showing freq. as 7Hz . ?
if i calculate it , R= 10K ohm and C= .000001 Farad
1/RC = 0.1s , so Freq. = 10 Hz
thats 3 Hz behind :?
ok , i forgot the formula thankyou
7.29 Hz calculated
7 Hz shown in simulation