Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

My ATA PAP2T-NA Adapter Bricked, I want to fix

Status
Not open for further replies.

tester22

New Member
hi guys i need your help, i got PAP2T-NA which is not working, just hang on 2 Lights on it 1 is Red & 1 is Green.

So i like to know how to fix this PAP2T.

I am attaching Photo, please have a look.

As well as I attach the Picture of PAP2T Motherboard.



Hopefully waiting for your reply



Thanks.
 

Attachments

  • PIC_1.JPG
    PIC_1.JPG
    242.1 KB · Views: 345
  • PIC-3.JPG
    PIC-3.JPG
    232.1 KB · Views: 357
  • PIC-5.JPG
    PIC-5.JPG
    238.8 KB · Views: 325
Not really user serviceable. Plus it's a cheap device here in Canada, about $40 new. Craigslist even cheaper, I've got one selling for $30 in Toronto.
 
i appricate for your help to come out to help me in this Board for Fixing the Problem.

So i am attaching 4 more Photos, hope it will help to rectify the problem. Hope it is readble.

If still my photos are not clear , no problem i will take more photos, untill you said it is ok to see clearlt.
 

Attachments

  • PIC_1456.JPG
    PIC_1456.JPG
    242.7 KB · Views: 318
  • PIC_1486.JPG
    PIC_1486.JPG
    236.1 KB · Views: 301
  • PIC_1463.JPG
    PIC_1463.JPG
    236.3 KB · Views: 306
  • PIC_1453.JPG
    PIC_1453.JPG
    244 KB · Views: 326
Last edited:
I am back again with few more Picture with valuse written on it.

Based on Picture#1 as you MARK on it
Yes the 2 CAPS are same – 33mf 100v

Based on Picture#2 as you MARK on it
3, 4 5, 6 are same written on it --- CZT5551 CENTRALK02
1,2 are same written on it --- ZFT955
On 7 it is written ------ AMC1117 F0823J

I got a multimeter like this, but i don't know how to measure the voltage etc, so if you let me know i will measure it.

Thanks
 

Attachments

  • PIC_1498.JPG
    PIC_1498.JPG
    248.8 KB · Views: 301
  • PIC_1510.JPG
    PIC_1510.JPG
    235.5 KB · Views: 324
  • PIC_1516.JPG
    PIC_1516.JPG
    236.4 KB · Views: 293
  • PIC_1521.JPG
    PIC_1521.JPG
    234.2 KB · Views: 296
  • mlt-1.jpg
    mlt-1.jpg
    9.6 KB · Views: 293
Last edited:
As blueroomelectronics said, it's probably not-repairable - it might well be corruption of the firmware, which would presumably require specialist equipment at the manufacturers to reload.
 
in 50 to 100 tries, some time it will back to proper power up, so once i reflash the latest firmware on this PAP2T. After flashing latest firmware still same problem i am having,

So it is more likely Hardware issue, may be Poor soldating on Chip having 50 pins etc,. If i know exact location of that poor soldaring then i will resoldar that components or pins.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top