haxan
New Member
Hi, can anyone please help me with multidrop communication using several PIC chips on one single bus with RS-485 transceiver.
I dont know how to send address byte using 9 bit UART. I am using the UART C18 library.
I want two function like
sendaddress(adr)
and
senddata(data)
sendaddress should also check if the addressee was found on the BUS or not.
Can anyone please help me.
I dont know how to send address byte using 9 bit UART. I am using the UART C18 library.
I want two function like
sendaddress(adr)
and
senddata(data)
sendaddress should also check if the addressee was found on the BUS or not.
Can anyone please help me.