Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
The MikroC IDE generates a .HEX file with the same name as your project.
That .HEX file needs to be programmed into your PIC.
If you check the config setup in MikroC it allows you to set up hotkeys (see F11) where you just press the key like F11 and it automatically opens up your other programmer software and programs the .HEX file. So you write all the code in MikroC, compile it, then just press F11 to program your PIC using the PICkit2.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.