Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

LTspice simulation of cells in parallel doesnt seem to work

Status
Not open for further replies.
Hi,
In the attached LTspice sim, i put a 3V7 cell in parallel with a 4V1 cell..........they should become the same voltage because they are in parallel but they dont.
Do you know whats going on.?
 

Attachments

  • Cells in parallel.asc
    577 bytes · Views: 214
This is what mine shows:
 

Attachments

  • cells in parallel.png
    cells in parallel.png
    17.8 KB · Views: 231
Hi,
In the attached LTspice sim, i put a 3V7 cell in parallel with a 4V1 cell..........they should become the same voltage because they are in parallel but they dont.
Do you know whats going on.?
In a simulation, nothing blows up when you do something you shouldn't do.
In real life, things are not so forgiving.

Never, never, never, put two mismatched cells in parallel. They should both be charged to the same voltage before you put them together.
 
Look at the battery current to see why this is not likely a real life circuit.
 
you didn't set a Rser for V2
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top