Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

LTSPICE signal+noise simulation

Status
Not open for further replies.

ERER

New Member
Hi

I would like to simulate such signal (Attached)
Can someone help me how to do it ?

Thanks !
118403
 
In LTspice, use a "behavioral voltage source" component in series with the signal source you need to make noisy. Set as "V=(rand(time*1e18)-0.5)*1.0".

Two signals in series. The outputs will add together. One signal is "signal" the other is random.
 
Hi
Thanks for the support

I've did it
The problem is that the noise is on top the signal
118428

I need a clear signal but with some noise floor
 
Ok my friend
But how can i simulate those two signals on one same line ?
Now the noise is over my signal, and i dont want it...
 
But how can i simulate those two signals on one same line ?
A signal line cannot be at two different voltages at the same time.
 
If you really want "one" but have "two" you could make a component that has these two voltage sources inside. (it will look like one)
118434

Is this what you want?
118435
 
Something like this? :

Noise.png
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top