Spot the error, as I can't.
According to the documentation dt & dh set the hysteresis. I've used a custom ref point. What I expect to happen is a range of 5.05-5.25 however what actually happens is there's no hysteresis and it switches around the ref point.
I've also tried removing the ref and setting dt = 5.15.
According to the documentation dt & dh set the hysteresis. I've used a custom ref point. What I expect to happen is a range of 5.05-5.25 however what actually happens is there's no hysteresis and it switches around the ref point.
I've also tried removing the ref and setting dt = 5.15.