be80be
Well-Known Member
I put a Junebug together I tested the volts it looked right but the green
and yellow leds both come on when I put the 18f2550 in it and it tells me with
the pickit2 software no pickit 2 found. i have checked the board five or six times and can't find any thing wrong. I pulled the chip and tried it in the clone
i made and it works fine. So the firmware is OK.
and yellow leds both come on when I put the 18f2550 in it and it tells me with
the pickit2 software no pickit 2 found. i have checked the board five or six times and can't find any thing wrong. I pulled the chip and tried it in the clone
i made and it works fine. So the firmware is OK.