K8004 problem with PWM controller noise

My electric model airplanes had a 0.1uf ceramic capacitor across the motor. Ceramic is good up to tens or hundreds of MHz but polyester capacitors are good up to only hundreds of kHz. A 0.47uf ceramic capacitor might not work at a high enough frequency.
 

Frequency is 29.333khz, I tested 0.1uf ceramic cap works but not all noise is gone, then I had 0.47uf polyester and it worked better with it. So I think if I change it to ceramic 0.47uf it will work fine and be smaller too.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…