letsrelaythat
Member
Hi All,
I have build a circuit using crocodile clips, and I have used a JK Flip Flop, however, my local electronics store only sells a Dual JK flip-flop.
I have the following circuit, to what pins do I need solder to make this circuit still work
The flip flop i can buy:
https://www.electro-tech-online.com/custompdfs/2004/09/CD4027BCPDF.pdf
Now with the attached circuit, when I pulse 5v+ at point A, the red LED comes on and stays on. If I pulse 5v+ at B, the red LED turns off, and the green LED turns on. This is all i'm trying to acheive so if theres an easier way please let me know, but I'd like to work this out as well
Thanks all in advance, :wink:
Tim.
I have build a circuit using crocodile clips, and I have used a JK Flip Flop, however, my local electronics store only sells a Dual JK flip-flop.
I have the following circuit, to what pins do I need solder to make this circuit still work
The flip flop i can buy:
https://www.electro-tech-online.com/custompdfs/2004/09/CD4027BCPDF.pdf
Now with the attached circuit, when I pulse 5v+ at point A, the red LED comes on and stays on. If I pulse 5v+ at B, the red LED turns off, and the green LED turns on. This is all i'm trying to acheive so if theres an easier way please let me know, but I'd like to work this out as well
Thanks all in advance, :wink:
Tim.