PappuNeelam
New Member
Hi All;
As I`m novice to PIC environment, I found something unusual with my PIC Burner. I have written a LED GLOW program for PIC16F876A, in assembly & I have the option to put configuration word in my programmer software itself. Before burning my .HEX file (MPLAB Compiler), I have put 3D39 or 3939 (Configuration Word). I`m using IBM ThinkPad laptop.
After burning in Flash RAM, at the verification time, its showing the message "Mismatch at location 0x00000000; Chip has the value oxoo; but it should be 0x83".
Shall I have to set the bit7 of Configuration Word (LVP mode on) ? or any other hardware issue.
Attaching the .pdf file, for your kind perusal.
Please help me !!
PappuNeelam
As I`m novice to PIC environment, I found something unusual with my PIC Burner. I have written a LED GLOW program for PIC16F876A, in assembly & I have the option to put configuration word in my programmer software itself. Before burning my .HEX file (MPLAB Compiler), I have put 3D39 or 3939 (Configuration Word). I`m using IBM ThinkPad laptop.
After burning in Flash RAM, at the verification time, its showing the message "Mismatch at location 0x00000000; Chip has the value oxoo; but it should be 0x83".
Shall I have to set the bit7 of Configuration Word (LVP mode on) ? or any other hardware issue.
Attaching the .pdf file, for your kind perusal.
Please help me !!
PappuNeelam