Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Interfacing Raspberry Pi with Keithley 3390

Status
Not open for further replies.

John Manuel

New Member
I wanted to interface Rpi with the function generator Keithley 3390. My goal is to capture the signal which Keithley 3390 generates and plot it using Rpi, i.e, to function it as an oscilloscope. I went through the reference manual of Keithley 3390 but could not come up with a solution. Please help. Any input would be very much welcome.
 
My goal is to capture the signal which Keithley 3390 generates and plot it using Rpi,
Please define "capture".
Do you want the Pi to look at the coax output of the Keithley and measure the voltage?
3390.jpg
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top