j_boodoosingh
New Member
Hey all, i'm doing a project to design and create a sensor for detecting angles of inclination, I have to connect this to a pic16f877 and then display the angle on a lcd. When these are done, i need to implement buttons for setting the desired angle of inclination so that when this angle and the angle detected by the sensor are the same there should be an audible indication. And finally, the device should have a reset so that when placed on any surface, you can "zero" the detected angle (like an offset). I'm new to programming so any suggestions and or source code will be very helpful. I have to use mplab.
Respectfully,
J.Boodoosingh
Respectfully,
J.Boodoosingh
Last edited: