I need help in making my project. using PIC16f877a

hi guys. i need help. who could make a program for pic16f877a? a bit complicated so i will pay for the program.

SMS remote switch.
the objective of the project is to:
0. power on the gsm module
1. send sms command to the gsm module
2. pic to fetch the sms sent
3. perform operation of the command
4. gives the output.

x-previous state(default=0)
command pic output notes
s1 on 1xxxxxxx
s1 off 0xxxxxxx
s2 on x1xxxxxx
s2 off x0xxxxxx
.
.
.
s8 off xxxxxxx0
status retrives all output and reply to your phone


reply format:
s1=on
s2=off
.
.
.

can anyone make a program for these?

gsm module:tc-35 siemens
at-command

You might try here:

yes i already browsed on that link. but it is only limited in one relay. what i need is 8 relays. can anybody give me sourcecode for my project?

i am not good in programming so i need really a good programmer to do my program. thanks in adance