I need good working rs232 interface scheme!!

Status
Not open for further replies.

vedo35

Member
Hi guys i found a lot of rs232 interface on google. Standart ic with max232. Some schemes diferent then other.
I made one of them but didnt work Same points are same like 1mf capasitors or gnd and vdd. Have somebody good working rs232 interface scheme ?

Regards.
 

hi,
This circuit is from the MAX232 datasheet, it works OK.
 

Attachments

  • AAesp06.gif
    25 KB · Views: 640
i did of this diffrent than datasheet ???????????????????????????
Will work? what do you think?
 

Attachments

  • rs232_interface.jpg
    61.7 KB · Views: 1,127
Your circuit appears to be the same as the datasheet except C13 is connected to Vcc (which is OK, see note) and C14 is 10µF which is better.

You say it does not work? Please measure the voltage on each pin and tell us what they are.

Pin Your Voltage
2
6
11
12
13
14
15 GND 0V
16
18 5V
 
Status
Not open for further replies.

Similar threads

R
  • Question
I need help with a push button...
Replies
11
Views
2K
ZipZapOuch
S
  • Question
Cant get touch working on ILI9341 display with Teensy 4.1
Replies
8
Views
2K
Salchicha
S
A
  • Question
2n2222 transistor logic shifter not working
Replies
5
Views
2K
danadak
S
  • Question
Cant get ST7735 display working with Teensy 4.1
Replies
6
Views
1K
Salchicha
S
C
Totem pole not driving IGBT, I need help w/picking driver
Replies
3
Views
1K
tepalia02
T
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…