I need something to play a game with some friends and some Paint Ball guns.
The circuit I need work like the bomb in (Half-Life) CounterStrike.
I must push a switch to ACTIVATE the fake bomb
Activate = 3 red LED (in line) flashing 1 sec On / 2 sec OFF + Buzzer beeping when the LEDs is ON.
After 35 seconds without Desactivation the 3 LEDs + Buzzer stay ON 5 seconds (the bomb explosed)
And all the system must be ready to play another round
to Desactivate =
I must push 1 or 2 switch to desactivate the 35 seconds timer
If I push 1 switch, I need to push it 10 seconds to Desativate
If I push 2 switch, I need to push it only 5 seconds to Desactivate
If I release the switch before Desactivation I must do it again.
(I mean if I pushed 3 seconds and released it, I must push it again 10 seconds
or 5 seconds to desactivate the timer).
When the system is desactivated the LEDs + Buzzer goes OFF and the system is ready to play another round.
If someone could draw the circuit shematic and send it to my e-mail adress:
tecknobabes@yahoo.com
I know that I must use some 555 timer and Logic door AND/OR but my electronics notions is too far away ( I took an electronic course 10 years ago and never touched a circuit since) ;-(
So I know I can put solder and build the board put Im not able to do the shematics.
Thanks a lot
Pascal
The circuit I need work like the bomb in (Half-Life) CounterStrike.
I must push a switch to ACTIVATE the fake bomb
Activate = 3 red LED (in line) flashing 1 sec On / 2 sec OFF + Buzzer beeping when the LEDs is ON.
After 35 seconds without Desactivation the 3 LEDs + Buzzer stay ON 5 seconds (the bomb explosed)
And all the system must be ready to play another round
to Desactivate =
I must push 1 or 2 switch to desactivate the 35 seconds timer
If I push 1 switch, I need to push it 10 seconds to Desativate
If I push 2 switch, I need to push it only 5 seconds to Desactivate
If I release the switch before Desactivation I must do it again.
(I mean if I pushed 3 seconds and released it, I must push it again 10 seconds
or 5 seconds to desactivate the timer).
When the system is desactivated the LEDs + Buzzer goes OFF and the system is ready to play another round.
If someone could draw the circuit shematic and send it to my e-mail adress:
tecknobabes@yahoo.com
I know that I must use some 555 timer and Logic door AND/OR but my electronics notions is too far away ( I took an electronic course 10 years ago and never touched a circuit since) ;-(
So I know I can put solder and build the board put Im not able to do the shematics.
Thanks a lot
Pascal