delphijustin
Banned
This circuit is so simple. It turns on/off devices that plug in to the outlet.
All you need is
**broken link removed**
A USB Cord (any type should work)
Some thing to cut-and-slice the USB Cord.
**broken link removed**
A 5VDC relay with contact rated at 125VAC
A Case so you don't get shocked.
Just be vary carefull. I will not be responsible for you getting shocked, computer getting fried or blowing a fuse.
Here are the pin wiring.
**broken link removed****broken link removed** We will only use Type A Connector.
**broken link removed**
Now wire Pin 1 on the relay to Live wire on the Power cord.
Now wire Pin 2 on the relay to Live wire on the Power Outlet( NEMA 15-5 Connector)
Now take pin 1(sometimes the red wire) from the USB cord to Pin 3 on the relay.
Now take pin 4(sometimes the black wire) from the USB cord to pin 4 on the relay.
Now take the other 2 unused wires from the POWER CORD and hook them up to the NEMA 15-5 Connector.
Now drill holes in the case to put your cords and connectors in.
Now plugin your device such as( Monitor,Printer, External Drives, etc) to test it, and the USB cord into the computer. Now it should turn on the device when you start the computer and turn off the device when you shutdown the computer.
I have not gotten the parts yet i will edit the post when i get them. to tell you if they work. So please no bad feedback.
All you need is
**broken link removed**
A USB Cord (any type should work)
Some thing to cut-and-slice the USB Cord.
**broken link removed**
A 5VDC relay with contact rated at 125VAC
A Case so you don't get shocked.
Just be vary carefull. I will not be responsible for you getting shocked, computer getting fried or blowing a fuse.
Here are the pin wiring.
**broken link removed****broken link removed** We will only use Type A Connector.
**broken link removed**
Now wire Pin 1 on the relay to Live wire on the Power cord.
Now wire Pin 2 on the relay to Live wire on the Power Outlet( NEMA 15-5 Connector)
Now take pin 1(sometimes the red wire) from the USB cord to Pin 3 on the relay.
Now take pin 4(sometimes the black wire) from the USB cord to pin 4 on the relay.
Now take the other 2 unused wires from the POWER CORD and hook them up to the NEMA 15-5 Connector.
Now drill holes in the case to put your cords and connectors in.
Now plugin your device such as( Monitor,Printer, External Drives, etc) to test it, and the USB cord into the computer. Now it should turn on the device when you start the computer and turn off the device when you shutdown the computer.
I have not gotten the parts yet i will edit the post when i get them. to tell you if they work. So please no bad feedback.
Last edited: