i want to power a halogen bulb on either 12V or 24V DC.
the bulb is rated 250W 24VAC so i assume i need a 24VAC inverter that outputs at least 11A, is that right? and if so where would i obtain such an inverter? thanks.
i want to power a halogen bulb on either 12V or 24V DC.
the bulb is rated 250W 24VAC so i assume i need a 24VAC inverter that outputs at least 11A, is that right? and if so where would i obtain such an inverter? thanks.
The filament is just a resistive element which heats up when current passes through it. It doesn't matter which direction the current is flowing, it will still heat up so you can use either AC or DC, providing the voltage (therefore the current) is the same as its rating.