Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
I want to make a circuit using mcu (microcontroller) that's can auto measure U,I, cos pi on the load AC (220v). It's same Watt meter hour . Please tell me some suggestion.
Thanks.
thanks . But this is project I can't buy a production that can do at all.
Because this project is studying.
- I think. If I use some resistors that's parallel with load (ac) then I use a rectifier to conver ac to dc and put into ADC of microcontroller. So I can measure Volt of the Load.
- With current ac, I use a sense resistor (1 Ohm). I solve it same about.
the Ohm law (I = U/R). I measure the current.
- But how a bout cos (pi) , and total power on the Load ?
All that's measured will be translated into Master (computer) on the RS485 network.
- I have some picture that's suggest a little but I am not sure.
Please tell me your point about It . thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.