Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
How to get 5V at least at 1 Ampere from a very low voltage source, at nearly 1 Volt capable of 10 Amperes; using a power transistor or mosfet and larger wire transformer instead of the usual awg#38 on ferrite bead ?
Don't know much about boost converters, but you get nothing for free. Where are you going to find 1 volt, 10 amp source? Maybe a huge capacitor, but it would be brief.
The problem with trying to boost a very low voltage like that is switching losses.
ie: A 0.5V drop across the switching device in a 10V input supply doesn't effect the efficiency as bad as a 0.5V drop across the switching device in a 1V supply would.
You could possibly use the classic joule thief circuit to supply enough voltage to start up one of the standard switching ICs. Once running, the IC could supply it's own source of higher voltage for itself and driving the FET switch.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.