Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

high power loss

Status
Not open for further replies.

robortwillys

New Member
Hi to all,

Okay.. Today I put in new engine mounts the car ran great before so once i finished i took the car out for a spin it started and ran well then once the oil warmed up i tried to rev the car out and it started spuddering around 5500ish the car will spudder sometimes but it will also run out correctly half the time it will always revup with the clutch in? LMK if you have any suggestions.
No vacuum leaks relays are good i did some research and there is no play in the vibration dampener.
 
Last edited:
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top