From:
https://www.olimex.com/Products/MSP430/Starter/MSP430-5438-STK/resources/MSP430-5438STK-REV-B.pdf
BOARD FEATURES
CPU: MSP430F5438 mixed signal microcontroller
LCD NOKIA 3310 black/white 84x48 pixels
JTAG connector
JTAG Power_In and Power_Out jumpers
Two extension connectors
UEXT connector
RS232 driver and connector
Power plug-in jack for 9V DC power supply
Voltage regulator +3.3V – VR1(3.3V)
2 status LEDs
Power on Led
Audio In
Audio Out
SD/MMC mini connector
USB device connector
Reset button
User joystick
PCB: FR-4, 1.5 mm (0,062"), solder mask, silkscreen component print
Dimensions: 100x 98mm ( 3.94x 3.85")
BOARD USE REQUIREMENTS
Cables:
The cable you will need depends on the programmer/debugger you use. If
you use MSP430-JTAG, you will need LPT cable, if you use MSP430-JTAG-TINY or
MSP-JTAG-ISO, you will need 1.8m A-B USB cable, if you use MSP430-JTAG-RF,
you can connect it to the USB port of your computer, or via USB cable type A –
female.
Hardware:
Programmer/Debugger – one of our Programmers – MSP430-JTAG,
MSP430-JTAG-TINY
, MSP430-JTAG-ISO, or MSP430-JTAG-RF.
Software:
MSP430 KickStart software.
It looks like you get a lot for $56.00
**broken link removed**
But you need the $75.40 programmer and software.
**broken link removed**