Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Help --- Pspice Germainium Diode Simulation ((help))

Status
Not open for further replies.

BABYBASS210

New Member
Hello everyone

I am trying to simulate the Germainium Diode characteristics in Pspice.

I only have the free version of Pspice and it does not have Germanium Diodes.

Simulating a silicon diode with a dc sweep and plotting the graph is no problem.

I can edit the properties of a silicon diode in Pspice but I do not know wich are the changes I have to make so that it can act like a germanium diode and give me an approximate .265 to .3 volt threshold voltage when I plot the graph.

Can anyone help me?

thank you all

Joey
 
I don't know if you can add models to Pspice student, but if you can, here is a model for you:

.MODEL 1N34A D( bv=75 cjo=0.5e-12 eg=0.67 ibv=18e-3 is=2e-7 rs=7 n=1.3 vj=0.1 m=0.27 type=germanium)

I found this by doing a Google search for "1N34A".
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top