As you make such things only once, better to make pickit2 as original as Microchip.
there is a link for one artwork that works well with mostly thro hole components.
as you get specific components you can load them, while initially bypassing them. But the PCB need to be made only once. it is uploaded by Nishal at
**broken link removed** on 18th Jan2009.
Here the transistors are to be pin swapped if you don't get original Philips BC639 and 640 with centre collector. also few minor errors are there, I could guide you to go thro' if you are interested. It is a one go PCB.
i am interested on this. Do you have any parts list for this. i can't find it. Let me first collect the parts first. This weekend i am going to make the pcb for pickit2 clone, LC meter and ofcourse the pickit2 full (any suggestion or tips?). i will update once i have done.
Do you have any idea, where do i get 3-6v dc geared motor in bangalore? online shop are costly and shipping charges also
i am interested on this. Do you have any parts list for this. i can't find it. Let me first collect the parts first. This weekend i am going to make the pcb for pickit2 clone, LC meter and of course the pickit2 full (any suggestion or tips?). i will update once i have done.
Do you have any idea, where do i get 3-6v dc geared motor in bangalore? online shop are costly and shipping charges also
there is a data change for the pin out.
BC639 and BC640 follow ECB order
BS170 and BS250 would follow SGD order.
IRF9z34 , if i remember, follows GDS order
however better confirm as I remember various styles are there for BS250 and BS170 / 2N7000.
you may check the brand you have and get the datasheet from alldataseet.com
other details i shall be posting you regarding minor changes in PCB of Nishal.
still i am not getting the bc640(phillps). i am going to make the pcb with the equallent. can you please let me know what are the minor changes in the nishal pcb.
3. I simply connect a wire after the 470R(Yellow LED) to Vusb+5V, now everything works perfectly, programmer-to-go working, Yellow LED lit up. I didn't remove U2 as well. I still can't calibrate it but do this does matter?
When i connected 16f84a thru' ICSP the device is not detected.
Sometime it is detected as 16f882 or 16f884. and sometime the
Device : Unsupported Part (ID=3000)