epotential
New Member
Hi. I'm going to call it a Spartin engine. I have an opportinity to design schematic and PCB layout for a dedicated motherboard using the VIA processor and some Xilinx Spartin 3 FPGAs.
I have to demonstrate that I can do this, but have never designed a 1.2 Ghz board before.
Anyone one that is famular with this task can call me at 281-379-1905 or e-mail at:
electronicpotential@houston.rr.com
It is a little difficult to go from a 200 page spec on the VIA Eden to a schematic, to say nothong yet of the Xilinx stuff.
Looking for insight from someone having this experience.
Thanks, Ray
I have to demonstrate that I can do this, but have never designed a 1.2 Ghz board before.
Anyone one that is famular with this task can call me at 281-379-1905 or e-mail at:
electronicpotential@houston.rr.com
It is a little difficult to go from a 200 page spec on the VIA Eden to a schematic, to say nothong yet of the Xilinx stuff.
Looking for insight from someone having this experience.
Thanks, Ray
Last edited: