Max_Powers96
New Member
I need a schematic for a splitter so I can plug in more than one set of speakers to my computer.
Thanks
Example:System Description:
The Boostaroo® is an audio amplifier that separates the signal into individual stereo channels to drive 3 separate headsets or speakers.
Frequency Response:
The Boostaroo® employs similar output amplifiers to those found in CD players. Frequency response is equal to or exceeds specifications. Typical specifications are 20 to 20,000Hz +/- 2 dB (EIAJ CP-307 Method).
Output (@ 3VDC):
Into 16 ohm head phones (stereo mini jack), approximately 40 mW per channel, 12 dB gain in sound per channel.
Power Requirements:
3.0 VDC: Two size AA batteries are required. Use of alkaline batteries is suggested for longer playing time.
**broken link removed**
Thanks
Example:System Description:
The Boostaroo® is an audio amplifier that separates the signal into individual stereo channels to drive 3 separate headsets or speakers.
Frequency Response:
The Boostaroo® employs similar output amplifiers to those found in CD players. Frequency response is equal to or exceeds specifications. Typical specifications are 20 to 20,000Hz +/- 2 dB (EIAJ CP-307 Method).
Output (@ 3VDC):
Into 16 ohm head phones (stereo mini jack), approximately 40 mW per channel, 12 dB gain in sound per channel.
Power Requirements:
3.0 VDC: Two size AA batteries are required. Use of alkaline batteries is suggested for longer playing time.
**broken link removed**