Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

gps dog tracker

Status
Not open for further replies.

simo

New Member
hi
im from finland (sorry my bad english)
i need help with my gps tracker project.i try build dog tracking machine.
i have this gps/gsm/gprs module **broken link removed**
how i can build this module transmit gps coordinate in my phone/pda using gprs network.
 
Gps dog tracker LoL , i had to click on this..
looks very cool 1-5 m accuracy..!!
your english is fine..


Specifications for GPS:
• Receiver 12 channel, L1 1575.42 MHz, C/A code 1,023 MHz chip rate
• Accuracy Position 10 m CEP w/o SA/Velocity 0.1 m/s, w/o SA/Time 1 µs synchronized to GPS time
• DGPS accuracy 1 to 5 m, typical, 0.05 m/s, typical
• Date WGS-84
• Acquisition rate (TTFF defined at 95% of first position localisation)
Snap start < 3 s, average
Hot start < 8 s, average
Warm start < 38 s, average
Cold start < 48 s, average
• Operating voltage 3.3 V DC ±5%
• Low power consumption ca. 200 mW at 3.3 V
• Protocols: NMEA-0183, RTCM SC-104, SiRF binary
• Crystal oscillator (TCXO), temperature compensated with frequency stability of ±2.5 ppm
• Memory 1 MB flash

Software
• Indoor tracking with less SNR
• AGPS with Wheelticks and Gyro
• Build-in history- and alarm function
• Remote tracking
 
simo i have no idea , if you have a specific question , regarding electronics , i'm sure someone could answer..
 
See my PCB Design post.

Im currently building a car GPS/Phone tracker....car, dog, whos to know ;)

Im using a Sony GR47 module and a Holux GM82 GPS unit...its looking credit card sized at the moment!
 
PhilM said:
See my PCB Design post.

Im currently building a car GPS/Phone tracker....car, dog, whos to know ;)

Im using a Sony GR47 module and a Holux GM82 GPS unit...its looking credit card sized at the moment!



do you have any picture or plan?
how much cost those moduls ?
what network you machine using gprs? sms?
 
simo said:
hi
im from finland (sorry my bad english)
i need help with my gps tracker project.i try build dog tracking machine.
i have this gps/gsm/gprs module **broken link removed**
how i can build this module transmit gps coordinate in my phone/pda using gprs network.

Hi,

I think you can just use SMS send GPS data.

Where did buy this gps/gsm/gprs module
**broken link removed** ?

Thanks,
Mike,
www.tangshop.com
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top