I have a full wave rectifier (input 24VACrms), has an LM2675 switcher circuit as the only load. Based on the webench design, I'm going to have about 0.5 to 0.6A input. I"m wondering if i need capacitance betwen the output of the bridge and the input to the switcher circuit (which has a 1uF and 100nF input capacitors) My standard electrolytics are too tall (limit is 0.287" due to mechanical concerns.
If so, I'd like PN recommendations for capactors.
Thanks,
Josh
If so, I'd like PN recommendations for capactors.
Thanks,
Josh