esp module resistance

daniyalkza said:

hi everyone
i have a very strange problem with my car and there is a short circuit without burnt fuse
i trace it and ended up to esp module
i removed it and measure resistance between gnd pins and hot pins the reading shows 1 mega ohm
also resistance between gnd and some other pins was 0.7 mega ohm
i want to know if it's normal or i should send it for repair

Click to expand...

ZipZapOuch said:

What vehicle is this?

Click to expand...

rjenkinsgb said:

It could be a shorted solenoid or faulty motor, so it only draws excess current when that particular part of the device is activated.

Click to expand...

Nigel Goodwin said:

Those readings are nothing like a S/C, in fact they are so high as to be almost O/C.

Why do you imagine there's a S/C? - if there was a fuse would probably blow, or things might smoke.

Click to expand...

daniyalkza said:

so you think it's normal?

Click to expand...

daniyalkza said:

i have removed it from the car and resistance remains so it's something inside the board

Click to expand...