Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

EMC Ground / Shield / Chassis / Return Paths

Status
Not open for further replies.
L

lienPCB

New Member
After watching some videos on grounds / return paths / shielding etc I came up with a design that I was wondering if someone could assist in assessing below simplified diagram with notes to see if it is a good grounding strategy also considering PCB EMI/EMC ?
Screenshot_20231115-203257_WhatsApp.jpg

Simplified diagram attached.
 
Last edited:
Sort by date Sort by votes
What are your specs for conducted noise/ripple and radiated crosstalk inside the box and outside radiated noise for the CM choke? Without specs, how will you know if it works?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question
Wierd grounding problem with laptop
2
Replies
23
Views
6K
Tony Stewart
Tony Stewart
F
  • Question
Y capacitor location for Conducted immunity?...for conducted EMC?
Replies
0
Views
859
Flyback
F
F
  • Question
50uH LISN needed but not for EMC test
Replies
3
Views
2K
Flyback
F
M
  • Question
PSU "Schematic" help me understand AC/DC Bridge Rectifiers, Proper Grounding, and Series AC Connections
Replies
8
Views
2K
Tony Stewart
Tony Stewart
Z
  • Question
Is sharing the same ground between a 12v ptc heater and a 5v fan ok?
Replies
2
Views
578
rjenkinsgb
rjenkinsgb

Latest threads

New Articles From Microcontroller Tips

Back
Top