Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

emailer

Status
Not open for further replies.

MartK

New Member
I am looking for a low-cost board (such as an ethernet IP relay) that, upon contact closure, can send a pre-defined email via an internet connection.
Anyone have any suggestions?
TIA
Marty
 
I recommend looking into a Raspberry Pi or similar board. It's a cheap, credit-card-sized computer that has a GPIO header as well as internet connection capabilities. It will require some coding but will definitely be a good platform with which to start:

https://www.raspberrypi.org/products/
 
Tks for the reply.
Yes, I know about the Pi etc but I was hoping for a quicker PnP solution. The relay boards I found are relatively large and expensive.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top