Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Emad Electric skateboard

Status
Not open for further replies.

Mr.Otis

New Member
Ok so I have a emad off road electric skateboard. Originally it is powered by 3 12v 10ah batteries wired together in series. To power a DC motor (model#MY8919) that's rated for 36v 28.4A 800w output. All controlled with a rc remote. Now after a lot of troubleshooting. I have come to the conclusion that something is wrong with the main control board. So I've decided to restructure the board so that it has a wired controller. What would be the best way to do do this? I was thinking of doing it kinda like a golf card would be done. With a solenoid and limit switch. But the DC motor is also equiped with what I think may be a breaking feature. Any advice and knowledge is appreciated.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top