I have taken one project-- Assembly of LPGas fired generator set of 50KVA capacity using old petrol engine and LPG conversion kit, and alternator of adequate capacity.
Now the hitch is how to control the firing thereby saving LPGas if the load is not 100%. However there is a limit for lower side i.e. idleling consumption. It needs electronic governor using micro contollers+stepper motors and solenoid valves. This electronic governor has to work according to the variation in load only. Infact this governor also should be suitable to either 25kva or 100kva too. Means designing is irrespective of generating capacity. OK Please help me providing circuit design. Thanks
Now the hitch is how to control the firing thereby saving LPGas if the load is not 100%. However there is a limit for lower side i.e. idleling consumption. It needs electronic governor using micro contollers+stepper motors and solenoid valves. This electronic governor has to work according to the variation in load only. Infact this governor also should be suitable to either 25kva or 100kva too. Means designing is irrespective of generating capacity. OK Please help me providing circuit design. Thanks
Last edited: