the best way to describe this is to tell you about the art project.
I'm making a 6' on/off computer button out of foam and fiberglass. I am going to have four images, two men and two women, each on the n, s, e, w side of the glowing center. In the exact center I want a switch that can activate the opposing images to make them glow. The catch is that each figure should have two lights (a green and a red) behind them (LED) for back lighting and the reason for ten variations or cycles is because I want a feature that will:
1.turn them all red
2. turn them all green
3. turn the nf (north figure) green and sf (south figure) red
4. turn the nf red & sf green
5. turn the nf & sf green
6. turn the nf & sf red
7. turn the ef green and wf red
8. turn the ef red & sf green
9. turn the ef & ws green
10. turn the ef & wf red.
This of course is a play on being turned on vs turned off and the power play between a man and woman in these various states.