Boncuk
New Member
Hi,
I found that circuit in Elektor.
It is quite accurate if the voltage regulator's output is exactly 6V. Use 1% or 0.1% resistors to improve accuracy.
Board size is 2.1X0.95"
Boncuk
EDIT: Faulty circuit removed - corrected circuit added
I found that circuit in Elektor.
It is quite accurate if the voltage regulator's output is exactly 6V. Use 1% or 0.1% resistors to improve accuracy.
Board size is 2.1X0.95"
Boncuk
EDIT: Faulty circuit removed - corrected circuit added
Attachments
Last edited: