Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Dynamic mic connection to mic amp

Status
Not open for further replies.

hantto

Member
Hello, I was just wondering how a dynamic mic would be conected to this circuit? **broken link removed**

Just a bit confused since a dynamic mic has only 2 outputs but the amp has +, - and gnd for input.

thx, Hantto
 
hantto said:
Hello, I was just wondering how a dynamic mic would be conected to this circuit? **broken link removed**

Just a bit confused since a dynamic mic has only 2 outputs but the amp has +, - and gnd for input.

A balanced microphone (as almost all decent quality ones are) uses three connections - this reduces noise and interference drastically. If you connect an un-balanced microphone to it, you simply use one of the inputs and ground - connecting the other input to ground. If it connects via a stereo jack socket, plugging a mono jack in will do this automatically. If it's an XLR connector, an unbalanced microphone will be wired to it as well.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top