I am in the process of building a device to check coil springs, I have the mechanical part figured out, I am using a 5000 lb rated load cell, I need
to build or buy a digital readout for it.
The specs on the load cell are: 15V DC Max Input
1.5MV/V output @ 2000 Lbs
Any Help would be greatly appreciated.
Thanks, Larry
to build or buy a digital readout for it.
The specs on the load cell are: 15V DC Max Input
1.5MV/V output @ 2000 Lbs
Any Help would be greatly appreciated.
Thanks, Larry