Ok so I have another question for you guys about a simple logic circuit.
All i really need to do is get a single pulse each time the inputted square wave has a rising edge.
This seems like a pretty simple task to complete to me, I just cant think of the logic that is needed. My first thought was something with a counter or Flip-Flop.
I found this article - **broken link removed**
And here they are basically using two counters to double the frequency of a supplied square wave by triggering on both rising and falling edge.
I just need something like the Ctr 1 out in this article.
Its basically just configuring a counter to provide a pulse at the output on the rising edge of the input. What counter could i use to do this?
I took digital all to long ago and unfortunately didn't pay much attention.
Thanks for any help guys!
-Ethan
All i really need to do is get a single pulse each time the inputted square wave has a rising edge.
This seems like a pretty simple task to complete to me, I just cant think of the logic that is needed. My first thought was something with a counter or Flip-Flop.
I found this article - **broken link removed**
And here they are basically using two counters to double the frequency of a supplied square wave by triggering on both rising and falling edge.
I just need something like the Ctr 1 out in this article.
Its basically just configuring a counter to provide a pulse at the output on the rising edge of the input. What counter could i use to do this?
I took digital all to long ago and unfortunately didn't pay much attention.
Thanks for any help guys!
-Ethan