Mosaic Well-Known Member Mar 21, 2015 #1 Hi all: I need to make a small push type solenoid , net 2mm diameter with a 1mm stroke, 5cm long. 20g force. 12VDC supply. At that diameter including wire wrap, it seems not possible. https://www.easycalculation.com/engineering/electrical/solenoid-force.php I need some help with this.
Hi all: I need to make a small push type solenoid , net 2mm diameter with a 1mm stroke, 5cm long. 20g force. 12VDC supply. At that diameter including wire wrap, it seems not possible. https://www.easycalculation.com/engineering/electrical/solenoid-force.php I need some help with this.
alec_t Well-Known Member Most Helpful Member Mar 21, 2015 #2 Do you need a continuous push, or just a very brief one? I'm thinking high current pulse might just do the job, but high continuous current would let out the magic smoke.
Do you need a continuous push, or just a very brief one? I'm thinking high current pulse might just do the job, but high continuous current would let out the magic smoke.
Mosaic Well-Known Member Mar 21, 2015 #3 Hmm, not certain of the duty cycle but I'd estimate perhaps 25%
alec_t Well-Known Member Most Helpful Member Mar 22, 2015 #4 What pulse frequency? Rapid pulsing will require low inductance and high current.