ADWSystems
Member
This is not a good application for bipolar transistors due to the "high" voltage drop of the junctions.
If I was to drive the gate with 12V I'd be good?
I the battery tester circuit a while back, the design used an N-channel and gate was driven between 2.5 and 5.0 volts for the grounded load. I'm not sure the difference between them.
If I was to drive the gate with 12V I'd be good?
I the battery tester circuit a while back, the design used an N-channel and gate was driven between 2.5 and 5.0 volts for the grounded load. I'm not sure the difference between them.
Last edited: