Hi guys
Built a step up converter but my output just seems to slowly increase and not create a constant DC output and the mosfet used for switching gets hot quickly.
Components I am using:
inductor = 12uH
Diode = Byt08p400
Load R = 10k
Cap = 100uF
Fet = IRF510
driver = mcp1404
Using a duty cycle of 0.5 at the minute. Any ideas of the problem?
Built a step up converter but my output just seems to slowly increase and not create a constant DC output and the mosfet used for switching gets hot quickly.
Components I am using:
inductor = 12uH
Diode = Byt08p400
Load R = 10k
Cap = 100uF
Fet = IRF510
driver = mcp1404
Using a duty cycle of 0.5 at the minute. Any ideas of the problem?